Application Of Rotary Joints On Rubber Open-Mill Mixers

Jun 23, 2026 Leave a message

John Smith
John Smith
I'm a mechanical engineer at Shandong Changsheng Rotary Joint Co., Ltd. Specializing in rotary joint design and manufacturing, I focus on creating innovative solutions for industrial applications. Follow my insights into the latest trends in fluid transfer technology.

Anyone in the rubber industry is certainly familiar with the open-mill mixer; it is a piece of equipment seen daily in rubber plants. From the arrival of raw rubber to the creation of the final product, the open-mill mixer handles the initial processing stage: it "softens" the hard raw rubber and mixes in various compounding agents, laying the groundwork for subsequent calendering and vulcanization.

 

Why do open-mill mixers need rotary joints?

 

An open-mill mixer features two large rollers arranged parallel to each other-one in front and one behind-rotating in opposite directions at different speeds. As the rubber is repeatedly squeezed and sheared within the gap between the rollers, its temperature rises rapidly. Precise temperature control is crucial at this stage: if it gets too hot, the rubber compound scorches; if it is too cold, the compounding agents fail to disperse properly.

This presents a challenge: the rollers rotate, yet the heating or cooling media (steam, thermal oil, or cooling water) originate from stationary piping. How do you transfer the medium from the fixed pipe into the rotating roller? This is the job of the rotary joint.

The rollers are hollow inside, and the rotary joint is mounted at the shaft end, connecting the stationary piping to the rotating internal chamber of the roller. Acting like a flexible joint, it rotates along with the roller while preventing leakage, ensuring a steady transfer of heat into or out of the system.

 

Surface Treatment For Rotary Joint Materials

 

What are the specific requirements for rotary joints used in open-mill mixers?

 

Operating conditions for open-mill mixers vary regarding roller temperature. Standard operating temperatures range from 90°C to 120°C, where steam heating or water cooling suffices. However, certain high-temperature formulations require thermal oil, pushing temperatures above 200°C.

Therefore, the choice of rotary joint depends on the operating conditions. Standard rotary joints-simple in structure and ruggedly durable-are adequate for steam or cooling water applications. However, when using thermal oil, a high-temperature model is required-such as the SC-type rotary joint, which withstands temperatures up to 280°C and features graphite bearing support for exceptionally stable operation. Some rotary joints designed for high-temperature heat-transfer oil feature a spherical-seat sealing design; the sealing ring offers several times the strength of standard graphite, making it resistant to breakage and ensuring a longer service life.

Here is another important detail: the rollers of an open mill expand when heated, causing changes in axial dimensions. Consequently, the rotary joint cannot be rigidly connected to the piping; a short section of flexible metal hose must be used as an interface to accommodate thermal expansion and contraction. Without this allowance, the joint would quickly fail due to the resulting stress.

 

It is no exaggeration to call it the "gateway" for temperature control.

 

Temperature is a decisive factor in how well and uniformly the rubber compound is mixed in an open mill. Although the rotary joint may seem inconspicuous, it serves as the sole conduit for the thermal medium-handling both cooling and heating as required. If this "gateway" becomes blocked or develops a leak, the entire batch of rubber on the roller could be ruined. Thus, despite its compact size, the rotary joint plays a critical role in the operation of the open mill.