Applications Of Rotary Joints in The Papermaking Industry

Jun 17, 2026 Leave a message

Michael Brown
Michael Brown
I'm a senior R&D engineer passionate about advancing rotary joint technology. At Changsheng, we combine cutting-edge engineering with reliable manufacturing to deliver superior products for various industries.

Papermaking might seem far removed from our daily lives, yet the tissues, cardboard boxes, and office paper we use every day all depend on it. A crucial stage in the papermaking process is "drying"-simply put, the wet paper sheets must be dried out. This task relies on the drying cylinder and its essential partner: the rotary joint.

 

How does steam work inside the drying cylinder?


A paper machine drying cylinder is essentially a massive, continuously rotating drum. High-temperature steam is supplied via a stationary pipe, but since the cylinder rotates, a connection is needed between the stationary pipe and the rotating cylinder that prevents steam leakage. This is where the rotary joint comes in.

This component acts like a flexible "joint," connecting the stationary steam pipe to the rotating cylinder shaft and safely delivering high-temperature steam into the cylinder's interior. Once inside, the steam heats the cylinder wall to over 100°C; as the wet paper sheet passes over the hot surface, the moisture evaporates, drying the paper.

 

Rotary Joint: Working Principle, Key Advantages And Application Scenarios

 

What happens when steam turns into water?


After transferring its heat to the cylinder, the steam condenses into water. This condensate cannot be allowed to accumulate inside the cylinder, as it would impair heating efficiency and cause the cylinder to vibrate-or "act up." Therefore, another mechanism within the rotary joint-the siphon-is required to extract the condensate from the cylinder.

This demonstrates the capability of the rotary joint: one port admits steam while another channel discharges condensate, allowing heat supply and water drainage to occur simultaneously without interference. Condensate is forced out of the cylinder through the siphon nozzle and then discharged via the piping connected to the rear of the rotary joint.

 

Reliability is paramount; mere theory won't suffice.


Paper machines operate continuously, 24 hours a day, with internal cylinder temperatures often exceeding 200°C and significant operating pressures. Furthermore, the cylinder expands and elongates due to the heat, altering its axial dimensions-a factor that poses a major challenge for the rotary joint's sealing mechanism.

Consequently, rotary joints designed for papermaking are far from ordinary components. High-end products in the industry-such as Tengxuan Technology' s QGX series-incorporate features like balanced seal designs, multi-spring compensation mechanisms, and fully imported antimony-impregnated sealing assemblies. They are also equipped with cantilever-mounted stationary siphons to ensure leak-free, durable performance during high-intensity, continuous operation. Without these features, a steam leak would not only waste energy but also fill the workshop with fog, compromising production safety and paper quality.

 

Where else are they used?


Beyond the primary application of drying cylinders, rotary joints are found throughout the papermaking line on various rotating rolls requiring heating or cooling. For instance, they are essential for calenders (where heated metal rolls smooth the paper surface), as well as for coaters, cooling cylinders, and paper-threading cylinders.

In short, while rotary joints may not be as conspicuous as the massive drying cylinders in a paper mill, they act as the "energy transfer hubs" of the production line. They quietly channel heat in and discharge condensate out, ensuring efficient and stable paper production. It is no exaggeration to call them the "golden supporting actors" of papermaking machinery.